Easy Hacks to Clean Your Rubber Rolling Floors

One of the greatest things about rubber rolling floors is that they are extremely low-maintenance. Apart from comfort, durability, and ergonomics, the fact that it takes very little to care for these flooring implements makes them a practical choice for almost any application. But low maintenance doesn't mean no maintenance, especially if you want your rubber rolling floors to keep their quality and durability for a long time. Here are some simple hacks you can follow to keep your rubber floors clean and in good shape:

• Initial cleaning of your rubber flooring should wait until at least 72 hours of installation, or as your manufacturer/supplier otherwise directs. This will give the adhesive enough time to set and establish a firm hold on the floor surface. Follow basic cleaning procedures during initial cleaning and avoid using chemical products that might damage rubber surfaces. The 72-hour precaution may not be necessary for static weight and click-together products, but make sure to heed this advice when installing rolling rubber floors.

• Small specks of dust, dirt, and debris trailed in by shoes or blown in by the wind can be abrasive and damaging to rubber floor surfaces. Left untreated, they can wear down and cause nicks to the rubber floor's finish. A regular pass of a vacuum cleaner or regularly sweeping the surface may be enough to remove this debris.

• Mild dish soap and water are usually enough to mop up spills and stains on rubber floors. However, for more deeply seated stains, you can use a more concentrated cleaning solution and a hand brush to help apply additional pressure to lift the stain.

• Avoid acidic and acetone-based cleaners and chemical solutions that contain turpentine. These can badly stain and damage your rubber floor. Also avoid rough sponges, scouring pads, or steel wool, as they can likewise scar and slice the rubber surface, doing more harm than good to your rubber floor. 

Source URL: http://rubberflooringblog.com/easy-hacks-to-clean-your-rubber-rolling-floors/

A Playground is Safer for Children When Rubber Mats are Installed

Rubber is an extremely versatile flooring material. One of the most popular uses for rubber flooring is playground matting. In fact, in the United States, playground rubber mats are a necessary safety feature that every play area must have. Lack of protective floor covering or surfacing can mean serious injuries to children who may experience bad slips and falls from tall playground equipment and structures. Even outdoor playgrounds utilize rubber mats in certain areas for an added layer of protection for the children.

Not only can rubber mats protect from slips, they are also highly impact-resistant, cushioning shock from accidental falls and preventing serious injuries. Rubber used in playground flooring is also designed for flexibility and springiness, which effectively add to the surface’s impact resistance.

Besides its safety features, rubber matting is also a preferred choice for playground surfaces because it helps absorb sounds and vibration, thus reducing noise from excited, hyped-up kids. This is especially helpful in populated areas where people tend to work or sleep during the day. Maintenance is also a breeze with rubber mats, as the material is highly stain- resistant and has the ability to repel dirt and grime well. With a little routine care, rubber matting can maintain its cleanliness and quality even in outdoor playgrounds. A quick sweeping of the surface to eliminate debris should be enough for daily maintenance, followed by regular cleaning with mild soap and water at least twice a week.

In terms of durability, rubber mats also score high, even under extreme weather conditions. Rubber playground mats are highly resistant to UV damage. They are water and frost-proof, which means they withstand long years of exposure to the elements. Rubber mats are not easily damaged and can maintain shape even with all-day abuse. This makes them a safe, low-maintenance, long lasting, and economical choice.

Source URL:  http://rubberflooringblog.com/a-playground-is-safer-for-children-when-rubber-mats-are-installed/

A Non-Slip Rubber Surface Says No Need to Watch Your Steps

Safe and ergonomic floor covering is a must, especially in high-traffic, industrial, as well as commercial areas. Of the many different types of floor surface coverings, rubber is probably the most practical option, providing a wide range of advantages, ranging from safety and protection to comfort, durability, and cost-effectiveness. A rubber floor surface can reduce accidents as rubber lends anti-slip properties that protect people from slipping hazards, such as excessively smooth floors, spills, and moisture. Below are other reasons why you should consider rubber floor coverings at home or in your place of work/business:

• Rubber floors increase surface comfort. This can be especially significant in work spaces where employees have to endure standing for prolonged periods. Rubber mats and floor coverings create a softer surface to stand on so as to provide cushioning under the feet. This reduces strain on the feet and legs, all the way up to the back and neck.

• Rubber floors’ anti-slip properties add a safety feature to your flooring, thus reducing the risk of accidental slips and falls. Many high-traffic areas such as commercial establishments, workplace halls, and even staircases are usually covered in rubber matting to take advantage of its anti-slip properties.

• Rubber floors absorb noise. Not only do rubber floor covers create additional padding under the feet, they also help create a sound barrier that absorbs sounds and vibrations, effectively soundproofing a work area where machine or equipment noise can be an issue.

• Rubber floors are eco-friendly. Some rubber products are made from natural rubber, which is organic and highly sustainable. Other rubber products, including those used for rubber floor coverings, are made out of recycled rubber. In either case, this makes rubber floors an eco-friendly choice over other flooring systems, not to mention an affordable alternative that requires little-to-no maintenance and can easily withstand years of use.

Source URL:  http://rubberflooringblog.com/a-non-slip-rubber-surface-says-no-need-to-watch-your-steps/

Using Rubber Flooring for Floor Protection in a Gym Environment

It’s hard to beat resilient and practical rubber flooring when it comes to gym applications. This type of flooring provides a comfortable and safe surface to walk, run, and jump on. These days, gym floors can be lined with full rubber roll floors, tiles, or mats that provide a soft and cushioned surface. This protects the original flooring from the wear and tear of daily use. At the same time, it provides a cushioned surface ideal for doing floor exercises, as well as a safety mat in cases of trips and falls.

Rubber offers some unique advantages that traditional flooring materials simply can’t match. These characteristics make rubber suitable for fitness studios and other similar applications. Concrete floors or ceramic tiles—while durable and hardwearing—can be way too rigid for fitness centers, and may cause injuries in case someone slips or falls over. Floors made of wood—which was a popular surfacing material for yoga studios and dance studios—are friendlier to the feet, but tend to wear down faster and need a lot of maintenance.

Meanwhile, rubber flooring offers a resilient surface that is both soft and resistant to wear. Rubber also provides water resistance on top of sound and impact dampening properties, which are necessary especially in fitness centers. What’s more, rubber tiles are also cost-effective materials that are ideal for covering large square footage. They are cheaper to install and maintain than other flooring options. Did you know that rubber flooring comes in modular units that are easy to install and often don’t need any adhesives or mortar? They come in standard-sized sheets or tile pieces, which make them easy to replace in case of damage. They can also be washed and cleaned with mild soap and water, making them a breeze to maintain.

Choosing the Right Industrial Rubber Products for Your Application

Rubber is a ubiquitous material with many commercial and industrial applications. There is a host of natural and synthetic rubber varieties, each with its own properties. It is crucial to choose the right kind of rubber to suit your intended usage.

For instance, pure gum rubber, which is derived from the sap of the rubber tree, is known for its abrasion and heat resistance. This makes it ideal for use in high heat and contact applications. It often comes in sheets, as tubing, or other special shapes, and can retain its shape in the presence of heat.

Silicone rubber is another form of rubber that has high resistance to heat. It also has a nonstick property, so it can be used as spacers, washers, or bushings, or for other similar applications. This type of rubber is sold in bulk as huge rolls or material.

For conveyor belts and bulk material movers, skirt board rubber can be a good choice because it is highly flexible and durable enough for the job. It’s a cost-effective solution, as it is easy to produce. It is also hard wearing, water and chemical proof, and resistant to spillovers, making it manageable for material moving equipment like belt conveyers.

For extra durable applications and high temperature uses, Styrene-Butadiene synthetic rubber (or SBR) is an ideal choice. It is a semi-abrasive material and has a high temperature resistance up to 210 degrees Fahrenheit. This makes it ideal for use in HVAC systems, cooling and heating fittings, hoses, and similar applications where other rubber materials will melt or degrade. It is often used in construction applications for heating, cooling, and climate control equipment.

It is well to remember that not all rubber materials are the same. Each type has a different resistance to heat, degrees of flexibility, and resistance to wear, so it is best to know the properties of each before choosing the product for your use.

Things to Take Care When Installing Rolled Rubber Flooring

Rubber flooring can act as an additional layer of protective cover for your floor, especially when used in a room that is often subject to conditions that can easily damage the surface. A rubber sheet roll may seem easy to install, where you simply roll it out across the floor and your work is done. However, rubber flooring installation requires a bit of preparation and a lot of care for best results. Here are some of the things to take care of during installation:

•    Have the right tools – You will need hand tools like a T-square, tape measure, notched towel, chalk line, and a utility knife. A flooring roller is optional. Likewise, make sure you have power tools, such as a shop vacuum. You may need a mop and bucket, extra knife blades, glue, double-sided tape, and a floor cleaner, too.

•    Prepare the floor – Most types of rubber flooring can be laid over hard floors, but you have the option to remove the old flooring. Factors such as the thickness of the rubber sheet roll, the condition of the existing floor, and the possibility of the flooring becoming higher after installation must be considered, too. If you decide to install over existing floor, make sure that the sub floor itself is level. Take note of low spots and have them raised using self-leveling concrete. Tough adhesive and old mortar should be chiseled off the concrete, and fasteners such as tack strip nails and padding staples should be pulled back.

•    Clean the floor – It does not matter whether you intend to use glue or tape to hold the rubber sheet down on the floor. You need to make sure that it is clean. So, take time to vacuum and mop if it is a concrete floor, and vacuum if it is a wood subfloor.

•    Remember to clean up after installation – Get rid of installation debris and dirt from the newly installed rubber sheet roll.

•    Consider hiring an expert – To avoid guesswork and costly mistakes and rework, consider hiring an experienced installer. This should save you a lot of time and effort, and you can be sure that the rubber sheet roll will be installed correctly and quickly.

Source URL: http://rubberflooringblog.com/things-to-take-care-when-installing-rolled-rubber-flooring/

4 Signs That the Floor Needs to be Replaced

Floors receive a lot of beating daily, whether at home or in a commercial space. They are typically exposed to heavy foot traffic, and in some cases, heavy objects and equipment. Replacing them takes effort, money, and time, and as a result, most property owners ignore signs of wear and tear until they have no choice but to replace the floor. However, this worsens the situation and increases your expenses, especially if the bad floor causes accidents and other issues in the property. Hence, here are four signs that indicate when it is time to replace your floor:

1. Slip and fall incidents have increased – It may be time to replace your floor if people frequently slip and fall. Wooden flooring and tiles become slippery when moist or wet, making them unsafe for areas that are often exposed to moisture and liquids. Hence, you may want to consider upgrading your flooring with non-slip materials, like anti-slip rubber or PVC covers.

2. Stains and water damage – Water and moisture accumulates on certain types of floors, making the surface unsightly. These factors can also cause mold and mildew to thrive in your floor. You may need to replace the flooring if it is deteriorated or stained from water damage.

3. Cracking – Cracks are not only unsightly. They may also indicate foundation issues or a weak thin set. Ceramic and porcelain floors may crack or break due to foundation issues or heavy impacts. Consult a professional to evaluate your foundation before changing your flooring. That way, other underlying issues can be fixed, and your new floor can last longer.

4. Accumulating dirt and grime – Certain types of flooring, like carpets, unsealed stone tiles, and wood, accumulate dirt and debris over time. You may want to consider replacing them if they are too difficult and costly to clean.

Precautions You Need to Take to Keep Your Floor’s New Look

Rubber floor tiles are great for use in home gyms, children’s rooms, basements, and other areas where a softer floor is desirable. Not only are they comfortable to walk on—they can also act as a thermal and moisture barrier in some applications.

Proper maintenance can ensure that your rubber floor tiles can last for a long time. It will allow you to extend the useful life of your flooring for many years and keep it pristine as the day it was installed.

Maintenance is actually quite simple and easy as long as you follow the right techniques. The only tools you need to maintain rubber floor tiles are a vacuum cleaner, a good mop, and some mild detergent.

For permanently installed rubber sheeting, it is best to always keep it clean of dust and soil particles. Constant exposure to these abrasive particles will eventually destroy the rubber floor surface. You can clean stains and liquids off the rubber matting with a damp cloth and some mild detergent. Avoid strong chemical cleaners, as they may react with the rubber compound and ruin or destroy your floor. Regularly vacuuming and mopping will help keep your rubber matting clean, tidy, and damage-free, making them last longer.

You can maintain rubber tiles with the same treatment. But since the tiles are movable, it would be a good idea to move and rotate them periodically. Swap rubber tiles between low-traffic and high-traffic zones to ensure that the flooring wears out evenly and to extend the life of the tiles. You may also take out individual tiles and clean them by hand when needed. As with rubber sheeting, avoid using strong cleaners, as they will react with the rubber compound and ruin the tiles. Unlike rubber sheeting, rubber tiles can be replaced as individual sections wear out, making them much easier to maintain and repair in case of damage.

Source URL: http://rubberflooringblog.com/precautions-you-need-to-take-to-keep-your-floors-new-look/

Check These Properties before Buying Garage Floor Mats

Rubber is a great material for use in the garage area because of its non-slip and moisture protecting properties. There are, however, a few things one must bear in mind before investing on a rubber floor covering solution in order to make the most out of it.

1.    First off, the area must be suitably shaped for use with a particular rubber matting solution. Although rubber yields really well, it is still wise to look at the overall shape of the area where you wish to apply it. A square shaped area is ideal as most rubber garage floor mats come in square shaped tiles, so there is less material wastage.

2.    For large areas, try to go for a more seamless solution by using large rolls of rubber instead of tiles. This of course will also depend on the room shape, but rolls of rubber flooring often will come out cheaper and will take less effort to install especially on larger areas.

3.    As with other materials used for the home, looks can also be a big factor in choosing the correct rubber flooring solution for your garage. Thankfully, there is a large array of textures, colors and styles of rubber flooring available today, so you will be spoilt for choice. Make sure to pick a color, design, or style of matting that will complement the rest of your décor.

4.    Weight and thickness of rubber flooring may vary and can have a significant impact in terms of wear, foot traffic, and overall performance. For temporary applications, it is best to pick out thinner rolls of rubber matting for easy removal and movement. Heavier and thicker rubber tiling or mats are ideal for more permanent installations.

Buy your garage mats online from a trusted retailer. The best ones can help you make the right choice. Simply send them a message or call their hotline with details about your intended application, and they can recommend the most suitable garage floor mats.

Source URL: http://rubberflooringblog.com/check-these-properties-before-buying-garage-floor-mats/